This boiler is BRAND NEW - has not been installed. Currently stored by import agent ABS in Auckland, pending installation instructions. HP & HT, 6mw capacity, MC centres, operators control console, pressure tank, circulating pump, pipework, manifolds.
75m3 Capacity, 2 Zones, Heating Capacity 1500KW, Design Pressure 11 Bar(G), Max Kiln Temp 110deg Celcius, Flanges PN16, Smithco SMI-72-6 RH Fan (6 Blade), Telco Elec 18.5KW D200L Motor, Danfoss VLT6000 Hvac Frequency Converter, Belimo Swiss AM230 Vent Motor, RTK Control Valve, 3 x Kiln Carts, Dimensions (L-16 x W-2.5 x H4.5m)
Kilns have been dismantled with great care , in pairs, with top section containing all fans, motors, heat exchange panels and vent controls etc , all intact for speedy reconection to the same controllers (and we have this quoted) Wall panels are fully insulated and taken off in self contained sections. 200 x 75mm hd aluminum legs are cut off at the bottom 850 mm which is encased in concrete from formed pockets in the foundations leg extensions and joining sleeves have been ordered and supplied for the simple rejoining process which can be welded or sleeve jointed with bolts. The resulting kiln chamber pairs are supported on 7 x 250mm UB,s which have shown very minimal(<10Mm) deflection in transit andal are stored on level ground ready fo simple uplift for truck transport These kiln chambers with a brand new Boiler are good for 30 years and come with all kiln weights and approx 25000 used but good condition hardwood fillets